1/2.9" Sony IMX323 1080P 2MP Nextchip 2440H AHD TVI CVI Analog 4 in 1 CCTV security Camera board

Technical Characteristics:

• IMX323 mega HD image sensor, 1080P, AHD / TVI / CVI / CVBS output, Effective resolution is up to 1920 * 1080 / 960H

• OSD support 15 different languages, Digital function / BLC, HLC / motion detection / privacy protection, 2D / 3D NR.

• Adopt Nextchip 2440H DSP with OSD function (mirror image, color / white &amp black, PAL / NTSC switch)

• Support 3X AF + UTC + UTC control AF (for 3X AF Specification, pls follow the back of pages)

• AGC type, day-night effect is distinct, Various Day-night modes can be switched by OSD menu, built-in HOLD picture (freezing) function.

• Optional support UTC, 4-in-1 output, Output LCD / CRT can be chosen by OSD.

• Power (600W) Video (2KV) dual lightning protection design, PCB is OSP antioxidant with 38 * 38 dual board design.

OSD Function description ：

• PAL / NTSC: Enter into OSD menu, enter into option 8 (Adjust) and then go into option 4 (NTSC / PAL) to switch freely. Press right button (shortly press) once switch to NTSC, twice to switch to PAL. Press left button to return, and press Save before exit. (The default is PAL)

• 4-in-1 switch (shortcut switch): Power on (without enter into main menu), long press the middle button for cyclic switching, first time comes to TVI, second time is CVI, third time is CVBS, fourth time is AHD. (The default output is AHD)

This product supports Auto-focus and zoom function, the matched function for OSD menu shortcut key is as follows:

LEFT (Focus +)
RIGHT (Focus-)
UP (Zoom +)
DOWN (Zoom-)

Instruction for the matched Auto-focus zoom lens: (The firmware should be corresponding with lens millimeter)

(1) M14/2.8-8mm_1/2.7(1.25*8pin)

(2) M14/2.8-12mm_1/2.7(1.25*8pin)

Recommendations for lens：D14-2812IR(3MP)-C-EE / D14-2812IC(R3MP)-C-EE(with ICR)

AF menu function:

（1）AF MODE:
SEMI: the module will be focused automatically once zooming manually (default)
AUTO：so long as the objects move, the module will focus on it automatically.
MANUAL: zoom manually need focusing manually at each time.
（2）POWER MODE
SAVE POSI： when power on, it can get back to the last position saved before power off (default).
CLOSE：no any change after power on.
WIDE：no mattter which zoom position is lens at before power off, it will back to 2.8mm after power
on.
（3）TDN AF: re-focusing automatically after day&amp night switch.
（4）LENS INIT: initialize lens
（5）ONE SHOT AF: focus manually for one time

3.3：The operation and notice for adjusting &amp installing AF electric lens:
(1)Enter into OSD main menu, choose AF

(2) On AF option, press the（ENSET）button again to enter into AF and adjust the menu, as the picture below:

（3）Choose the option 4

Technical Characteristics:

• IMX323 mega HD image sensor, AHD / TVI / CVI output. Effective resolution is up to 1920 * 1080

• OSD support 12 different languages, with strong light inhibition / white balance, BLC / DPC, 2D NR function

• Adopt Nextchip 2470H DSP with OSD function (mirror image, color / white-black, PAL / NTSC)
  

• AGC type, day-night effect is distinct, various day-night modes can be switched by OSD menu
  

• UTC (optional), 3-in-1, switched by OSD, Enhancement adjusted supported by OSD
  

• Power (600W) video (2KV) dual-lightning protection design, OSP antioxidant PCB, size 32 * 38 dual board.
  

OSD Function description ：

• PAL / NTSC: Enter into OSD menu, Enter into option 7 (Adjust), then go into option 4 (OUTPUT MODE), Choose option 2 (frame rate) to switch PAL / NTSC. Click right button (click shortly) once to switch to 30fps NTSC, twice to switch to 25fps PAL, click left button to return. And press Save before exit. (The default is PAL).

• 3-in-1 switch: Enter into OSD menu, enter into option 7 (Adjust), then go into option 4 (OUTPUT MODE), Choose option 1 (FORMAT) Press right button once (press shortly) to change to CVI, click middle Enter button to switch twice to change to TVI, click middle Enter button to switch press left button to return. And press Save before exit. (The default is AHD)

• 3-in-1 switch (shortcut switch): Power on (without enter into main menu), long press the up button for 5 seconds comes to CVI down button is TVI right button is AHD right button is TVI. (The above standard is defaulted). Customized external switch modes is available. (The default is AHD)

Pin definition:

OSD Menu Port

    D Down (Orange)

    U Up (Gray)

    E Enter (Purple)

    R Right (Green)

    L Left (White)

    G GND (Brown)

    M1 M2 Can set to Mode switch or Alarm Output

Power video port

    V    Yellow

    -/G    Ground

    +    Power+

CDS     LED board photoresist

ICR    IR-CUT dual filter switch